OLT(241860295) 10:58:43 AW-759006566 OLT(241860295) 10:58:49
High quality 1.5L scale lab spray dryer equipment
Lab scale spray dryer is suitable for the production of in universities, research institutes and food and pharmaceutical chemical enterprises.
In response to the growing demand for high-precision and high-stability material processing equipment in Poland’s fine chemical and industrial manufacturing sectors, our company successfully completed a customized mixing tank project for a local Polish industrial client in 2026. The project includes three sets of industrial premix tanks with different specifications, covering effective volumes of 8.5 cubic meters, 6.7 cubic meters, and 1.5 cubic meters respectively. Tailored exclusively for the client’s high-viscosity raw material production and premixing processes, the whole equipment set integrates pressure resistance, constant temperature control, efficient mixing and anti-residue design. It fully adapts to the complex production environment and strict process standards of European industrial production, and has passed full factory testing and technical verification before delivery, marking another successful breakthrough of our customized fluid processing equipment in the Central European market.
Poland’s manufacturing industry has maintained steady development in recent years, with increasingly stringent requirements for equipment durability, processing accuracy and operational safety. Traditional single-structure mixing tanks often face problems such as uneven mixing of high-viscosity materials, unstable temperature control, and insufficient pressure resistance, which cannot meet the continuous and standardized production needs of modern factories. Based on the client’s actual production scenarios, raw material characteristics and long-term operation demands, our technical team optimized the structural design, material selection and mixing system of the three tanks in a targeted manner, realizing differentiated functional matching for different volume specifications while maintaining unified high-standard performance parameters.
The three customized mixing tanks adopt a standardized pressure and temperature control system to ensure consistent operational safety and process stability in batch production, with all core parameters compliant with European industrial equipment safety norms.
In terms of pressure resistance performance, all three tanks support a maximum over pressure of 1.0bar and a maximum negative pressure of -0.7bar. The dual positive and negative pressure resistance design enables the equipment to adapt to vacuum defoaming, pressurized homogenization and other auxiliary processes involved in the client’s material processing, effectively avoiding tank body deformation, material overflow and air mixing defects caused by pressure fluctuation during production. This pressure resistance configuration fully covers the conventional working pressure range of high-viscosity material premixing, ensuring safe and stable long-term continuous operation.
In terms of temperature control performance, the maximum allowable shell temperature of the equipment is set at 135℃, which meets the heating and constant temperature processing requirements of most high-viscosity industrial raw materials. All tanks are equipped with shell inlet and outlet temperature sensors to realize real-time monitoring, data feedback and precise adjustment of internal material temperature. To solve the problem of inaccurate temperature detection of high-viscosity materials (which are prone to poor fluidity and temperature stratification), we adopt a professional bottom temperature measurement design. The temperature measurement point of each premix tank is arranged at least 1 meter away from the tank bottom, which avoids detection errors caused by material precipitation and bottom heat accumulation, ensures that the monitored temperature data can truly reflect the overall temperature state of internal materials, and provides accurate data support for constant-temperature mixing and reaction processes.
In terms of material selection related to safety and durability, the internal storage tank of all three devices is made of high-quality 316L stainless steel. This material has excellent corrosion resistance, oxidation resistance and wear resistance, and can adapt to the long-term processing of high-viscosity, slightly corrosive industrial raw materials. Compared with ordinary stainless steel, 316L stainless steel effectively reduces material adhesion, is easy to clean and maintain, avoids cross-contamination of batches of materials, and fully meets European industrial production environmental protection and sanitation standards. In terms of the heating system, the equipment adopts jacket plate heating technology. The jacket heating structure can realize uniform heat conduction on the tank wall, with fast heating speed and small temperature difference in the tank. It avoids local overheating and material denaturation problems easily caused by traditional single-point heating, and improves the consistency and qualification rate of material processing.
The client’s core production pain point lies in the poor fluidity and difficult homogenization of high-viscosity raw materials. Conventional single-shaft mixing equipment has obvious defects such as low mixing efficiency, easy material dead angles and uneven blending when processing high-viscosity materials, which seriously affects the stability of product quality. To solve this industry problem, our technical team implemented a differentiated customized mixing scheme according to the tank volume and actual material processing load.
Among the three sets of equipment, the 6.7 cubic meters large-capacity mixing tank, which undertakes the main batch premixing work of high-viscosity materials, is specially equipped with an advanced dual stirring mode. The dual stirring system combines the advantages of different stirring structures, forming a three-dimensional circulating mixing state inside the tank. During operation, the dual stirrers carry out synchronous and directional stirring movements, which can effectively break up the agglomeration of high-viscosity materials, eliminate mixing dead zones at the tank wall and tank bottom, and greatly improve the mixing uniformity and mixing efficiency.
This customized design solves the key problem that high-viscosity materials are difficult to fully blend in large-volume tanks. While ensuring thorough mixing of materials, it shortens the production cycle, reduces residual raw materials in the tank body, and lowers production cost waste. The 8.5 cubic meters and 1.5 cubic meters tanks adopt optimized single-structure stirring configurations according to their process positioning. The large 8.5 cubic meters tank is mainly used for temporary storage and fine blending of low-load mixed materials, and the small 1.5 cubic meters tank is used for small-batch formula debugging and finished product temporary storage. The matching conventional stirring structure can meet the process demand while realizing energy-saving operation, forming a high-efficiency and energy-saving collaborative matching system with the dual-stirring large tank.
This customized mixing tank project fully reflects our core advantages of precise customization, technical optimization and adaptive design for European industrial customers. All equipment integrates safety, stability, efficiency and durability, and is highly compatible with the local production process of Polish industrial manufacturing.
In terms of safety performance, the unified positive and negative pressure resistance design and high-temperature resistance configuration eliminate potential safety hazards in the production process, and the real-time temperature monitoring system realizes intelligent early warning and precise control, which is in line with the high safety management standards of European factories. In terms of processing performance, the 316L stainless steel material and uniform jacket heating system ensure the stability of material processing, and the targeted dual stirring design for high-viscosity materials fills the technical shortcomings of conventional equipment in high-viscosity processing scenarios.
In terms of economic and practical value, the differentiated volume collocation of the three sets of equipment covers the whole production link from small-batch debugging, large-batch production to intermediate storage, realizing the integrated layout of the client’s premixing process. The optimized structural design reduces equipment failure rates and daily maintenance costs, and improves the overall production efficiency and batch stability of the production line.
The successful delivery and commissioning of the Polish customized mixing tank project further consolidates our market position in the Central European industrial equipment customization field. Relying on accurate insight into customer process demands and mature customized technical solutions, we have solved the core pain point of difficult homogenization of high-viscosity materials for Polish clients, and delivered high-standard industrial fluid processing equipment that meets European norms.
In the future, we will continue to focus on the differentiated production demands of global industrial customers, continuously optimize equipment structure and technical parameters, provide more targeted customized equipment solutions for high-viscosity material processing, chemical premixing and other scenarios, and help more overseas enterprise customers realize efficient, stable and standardized intelligent production.
Интернет Сервис
+86 15960821529
kevin@ollital.com
kevinollital@gmail.com
+86 15960821529
+8615960821529